Programming the In-Band DTMF Protocol8.2.2. Selecting an Operation TypeYou can program each event to perform an operation. To select an operationtype, enter:*201 + XX + YYXX indicates the event number (00-39)Y indicates the operation to be performed by the unit according to the followingoptions:00 = Play the Automated Attendant’s Opening Script01 = Leave a message in a designated mailbox02 = Retrieve messages from a designated mailbox03 = Play a specific script 104 = Play the busy menu05 = Play the No-Answer menu06 = Play the Do Not Disturb menu07 = Disconnect the call08 = Record the conversation09 = Play a specific script and change to 1st language 110 = Play a specific script and change to 2nd language 111 = Play a specific script and change to 3rd language 112 = Play the Directory Listing (DBN)13 = Transfer to a mailbox 114 = Transfer to an extension115 = Transfer to the operator1 = A destination must be defined for these tasks. The destination of theseoperations is determined through code *202.Voice Mail and Auto Attendant System Installation and Programming Manual 8-3
