DTMF Programming NOTEXX is script message 00-26, 31-36 and 41-46.4.4.6 Programming Script MessagesYou can program each script message separately. The programming commandformat for script messages is:* + Command Code + XX + B + YY + #Where:Command Code defines the action that should be taken when B is pressedduring playback of script message XX.XX = a script message number.B = the digit dialed by the caller during playback of script message XX or at theend of the message. B can be 0-9 or * (for end of message).YY = the destination, which can be an extension, mailbox or another scriptmessage. NOTEDo not define the Operator ID digit on script messages.The command codes used to build the Automated Attendant Script Menu arepresented on the following pages. You can program one of the following actionsfor each script message:z Play another script messagez Return to the opening menuz Play another script message and change the languagez Transfer the call to an extensionz Transfer the call to the operatorz Transfer the call to a mailboxz Disconnect the linez Leave a message in a mailboxz Retrieve messages from a mailboxz Direct dial to an extensionz Transfer a call directly to a mailboxz Dial a free DTMF stringz Place a call on holdz Blind Transfer to the busy extensionz Play the directory listingVoice Mail and Auto Attendant System Installation and Programming Manual 4-17
