Oak Telecom VoxBox User Manual
Also see for VoxBox: User guide
                                                                                                                                                                     | |
Contents
| 
DTMF Programming4.5.1.2 Changing the Operator’s PasswordThe System Administrator can change the operator’s password by dialing code*900 to enter the programming mode, dialing the System Administrator’spassword and then dialing:*601 + * + Old Password + New Password + #Operator’s password must be 4 digits long. NOTEDo not use spaces, letters, * and # keys.To disable the operator’s password, enter “0000”.4.5.1.3 Resetting the Mailbox PasswordThe System Administrator can reset a mailbox password to its default (1234) bydialing code *900 to enter the programming mode, dialing the SystemAdministrator’s password and then dialing:*570 + XXXX + #Where:XXXX is the mailbox number.The mailbox owner can change the mailbox password.4.5.2 Activate Flash Memory Force ReorganizeThe Flash memory reorganize option automatically reorganizes and optimizes thedata stored in the unit.The system administrator can activate the Flash memory Force Reorganize optionby calling the unit and, during the opening greeting, dialing:*900 + Password + *610 NOTEThis option cannot be deactivated, and should be activated by a certified technician only.4.5.3 Changing to/from Day Light Saving TimeThe operator can change to/from Day Light Saving time by calling the unit and,during the opening greeting, dialing:*7 + XXXX + YXXXX = the operator’s password.This password can be disabled.Y = 0; reduces the time by one hourY = 1; increases the time by one hour.Voice Mail and Auto Attendant System Installation and Programming Manual 4-27 |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine