42 Océ CS 5050/5070 User ManualMain menu at a glanceMain menu Menu options Subsequent options (in italics) or functionLoadmediaMoves media into/away from platenCut Cuts mediaPause Stops print job temporarilyReset Clears print buffer after job cancellationFeedMediaForwardMedia counterDisplay counterBackwardEnd of mediaAdvances media to the front of printerTracks the length of media remaining on a rollShows and prints the length of media remaining on a rollMoves media to the back of printerDetects when media no longer advances through the printerSetup Print modePaper optionsUser setupInk optionSerial commHPGL/2 menuExitColour mode, Quality mode, Dots per inch, Print passes,Carriage speed, Print direction, ExitSupply type, Media standard, Margins, Auto-load delay, Au-to-cut, Save media, Auto-wipe, ExitSelect user, Save user, Unit select, Language, Init. settings,Print settings, LCD contrast, ExitInk reduction, Ink preheat, Dryer, Dry time, ExitBaud rate, Data bits, Parity bits, ExitPalette select, Control, Rotation, Nesting menu, Reprints,Ink limit, ExitReturns to the main menuUtility PrimeAccess cartridgeDisplay settingsPrint settingsPrints the prime patternMoves carriage away from service stationDisplays information such as paper width and height, ontime, cumulative plot timePrints information about media size, firmware version, RAMsize, plot hoursColour CalibmenuPrints the colour calibration test pattern values, sets the col-our values determined by the test pattern.Calibration menu Use Calib XY, Paper axis test, Colour Db menu, Open jetmenu, Paper axisService menu(diagnostics usedby technical sup-port)Calibration, Diagnostics, About, Cartridge Information
