Printing with HP-GL/2 67Selecting the paletteThe "Palette select" option lets you choose either the HP-GL/2 or AutoCADpalette. Each palette allows 256 colours with 8 predefined colours, as shownbelow:tttt To choose a palette1 From the main menu, press Setup menu/HP-GL/2 menu/Palette select.2 Choose either HP-GL/2 or AutoCAD.3 Press OK.Setting the "Control" functionSet the control to establish whether it is the software application or the printercontrol panel that determine certain printing functions. Control overrides thefollowing functions in the HP-GL/2 header file:n "Repeat Plot" (RP): when you set control to the printer, the printer willignore RP commands in the print file and make only one print. On thecontrol panel you can use the "HP-GL/2/Reprints" menu to specifyadditional copies.n "Enable Auto Cutter" (EC): when you set control to the printer, the printerwill ignore EC commands in the print file, and will not automatically cutafter each print. On the control panel, you can enable automatic cutting orinitiate a command for a single cut.Pen number HP-GL/2 AutoCAD0 White White1 Black Red2 Red Yellow3 Green Green4 Yellow Cyan5 Blue Blue6 Magenta Magenta7 Cyan Black
