CS655 Pro 9-9Basic job settings 99.1.4 Copying mixed size originals: MixedUse the Mixed mode to copy the mixed size original set scanned from the ADF with Auto Paper Select orAuto Zoom activated.0 Load the original in the ADF.0 Combination of the original sizes to be mixed depends on the widest original width (width of the ADForiginal guides). See "Positioning originals into the ADF" on page 8-11 for details.0 Do not load more than 100 sheets of the original, otherwise the original may be misfed or damaged, ormachine trouble may be caused.If the number of original sheets exceeds 100, divide them into blocks to scan. For details, see "Separatescan mode" on page 9-16.0 To scan the original from the original glass, Separate Scan mode is required. For details, see "Separatescan mode" on page 9-16.0 With Mixed specified, Auto Paper Select will function automatically.To copy onto a single and desired paper size, manually specify Auto Zoom. For details, see page 9-22.1 Position the original.– Arrange the mixed size originals aligning the left and rear sides.For details, see "Positioning originals into the ADF" on page 8-11.2 Touch [Original Setting] on the Copy Screen.The Original Setting Screen will be displayed.3 Touch [Mixed] to highlight it.4 Touch [OK] to complete the setting and return to the Copy Screen.– Touch [Default Set] to restore the initial setting, or touch [Cancel] to resume the previous setting.Function DescriptionAuto Paper Select Makes a copy of the same size as the original set.Auto Zoom Copies onto a single and desired paper size in appropriate zoom ratio automati-cally selected for each original page.
