11 Application functions11-64 CS655 Pro11.17.8 Detailed setting in stamp/watermarkMaking fine adjustment on printing positionUse this function to make fine adjustment on printing position of Built-in Stamp, Set Numbering, Page No.,and Date/Time. The adjustment range is 0 to 50 mm, in lengthwise direction ([Top] or [Bottom]) and inwidthwise direction ([Right] or [left]).1 Touch the desired direction key to highlight it, then use [,] and [+], or touch panel keypad to enter thedesired amount.2 Touch [OK] to complete the setting and return to the previous screen.Setting start number in set numberingTouching [Start Number] on the Set Numbering Screen will display the following screen to allow you tospecify the start number.1 Use [,] and [+], or touch panel keypad to enter the desired start number. Up to four digits can bespecified.2 Touch [OK] to complete the setting and return to the previous screen.
