11 Application functions11-42 CS655 Pro11.14 Copying image in the center of copy paper: Image centeringUse this function to detect the image area of the original and center the whole image on copy paper.1 Position the original.– Both ADF and original glass are available.2 Touch [Application] on the Copy Screen.3 Touch [Image Centering] on the Application Screen.– The incompatible function keys will be dimmed to show inactivity.– Non-Image Area Erase will be selected automatically. If using ADF to scan the original, touch it todeselect this function.– If Book Copy is used in combination, the original smaller than the selected paper size will be printedin the center of the copy paper without image division performed.4 Touch [OK] on the Application Screen.The Copy Screen will be restored, with highlighted [Non-Image Area] and [Image Centering] keysdisplayed under the [Application] key.These keys can also be used to display the Application Screen for making setting change.Auto Zoom and Auto Paper Select are released and e1.0 magnification is selected automatically.Available copy modes are 1->1 and 1->2. Selecting [1->2] will select [Separate Scan] automatically.5 Enter the desired print quantity from the control panel keypad, then press [Start].The machine will start printing when ready for output.2 ReminderImage Centering may perform incorrectly if the lighting in the work place is directly over the originalglass. In this case, consult your service representative about an appropriate place for installation.
