CS655 Pro 11-21Application functions 116 Touch [OK] to complete the setting.– To restore the previous setting, touch [Cancel].– To release the Insert Image function with the current setting remained, touch [Function Off].7 Touch [OK] on the Application Screen.The Copy Screen will be restored, with highlighted [Insert Image] key displayed under the [Application]key.Use this key to jump to the subsequent screen to make any setting change.The [Separate Scan] key on the Copy Screen also appears highlighted to show that the Separate Scanmode is automatically selected.8 Select additional copy conditions, as desired.9 Press [Start] on the control panel.– The machine starts scanning the original loaded in the ADF.10 Place the original of image insertion on the original glass.– Open the ADF, position the insertion original facedown on the original glass, then gently close theADF.11 Press [Start].– When scanning multiple originals, be sure to start with the first page and repeat steps 9 and 10 forall the originals in page order.12 Touch [Separate Scan] to exit the Separate Scan mode.13 Enter the desired print quantity from the control panel keypad, then press [Start].The machine will start printing when ready for output.
