13 Advanced information13-6 CS655 Pro13.2 Making sample set for checking results: Proof copyUse Proof copy to produce a sample of the copied set before making multiple copies. This is a convenientand cost effective way of viewing results of the copying selections.0 Proof copy is available when using ADF, or when using Separate Scan mode for more than 100 sheetsof original or originals to be scanned from original glass.1 Position the original, then select the desired copy conditions on the Copy Screen.– Or, use Separate Scan mode to scan all originals.2 Press [Proof Copy] on the control panel.A sample copy will be output while scanning originals in theADF.If Separate Scan mode has been used, a sample set will bedelivered immediately.3 Check the sample copy for specified copy conditions.– Some conditions can be changed from the Copy Screen. See page 13-3 for details.4 Change the settings or print quantity, as required, then press[Start].– If the desired selection cannot be changed, press [Reset]to delete all the data in memory and restart the job setting.
