9 Basic job settings9-30 CS655 Pro9.6 Paper settingEach paper tray has been preset with paper size and other specifications. The setting items are as follows:- Paper Type- Name- Weight- Both Sides Adjustment- Speed Setting- Hole-Punch- Colored Paper- Air Assist (Tray 4 of Large Capacity Unit LU-202 only)Paper sizeThe machine can be set to detect the standard paper size when loaded or to accommodate a specific size(custom size or tabbed paper size).The tray specified as Standard or Tab Paper allows Auto Paper Select, Auto Zoom, and Rotation to function.The tray specified as Custom cannot be used when these functions are activated.Paper specificationsUsing [Paper Setting] on the Copy Screen or Machine Status Screen, paper specifications preset for eachtray can temporarily be altered, new specifications can be registered, and registered specifications can berecalled.The following describes how to use Auto Paper Select, Auto Zoom, and Rotation functions, and how tochange/register the paper size and other specifications for each tray as well as to recall registeredspecifications.Improving monk on large-sized paper or feedability of small-sized thick paper in duplex printingIf printed image on large-sized paper shows unevenness, or small-sized thick paper has difficulty in feedingwhen duplex-printed, adjust fixing pressure of the fixing unit to make improvement on it.!DetailThe User Setting allows you to delete the registered paper specifications. It also gives efficiency inregistering more than one sort of specifications. For details, see the User’s guide – POD Administrator’sreference.The following describes how to use Auto Paper Select, Auto Zoom, and Rotation functions, and how totemporarily change the paper size and other specifications registered for each tray as well as to recall presetspecifications.
