3 Paper and original information3-8 CS655 Pro!DetailUse the Paper Setting function to specify the paper size to be loaded in tray 1 to 4 and bypass tray,selecting appropriate one from [Standard], [Custom], and [Tab Paper]. With [Standard] selected, themachine will automatically detect the paper size loaded in the tray. See page 9-33 for details.Auto tray switch functionIf the selected paper tray runs out of paper while a job is being printed and a different paper tray is loadedwith paper meeting the following conditions, the other paper tray is automatically selected so printing cancontinue. If the optional Large Capacity Unit LU-202 is installed, a maximum of 4,500 copies can be madecontinuously. (The paper tray is automatically switched only if the "ATS Permission parameter" in the Utilitymode is set to "Permit".)Operating Conditions (Set the following condition at "01 System Setting\03 Feed Tray Setting" of UserSetting.)- Select the paper trays to be selected automatically by "02 Feed Tray Auto Selection", if Auto paperselect is functioned.Tray Priority is available.- Select "On" at "03 ATS Permit Setting"- Select the paper type setting of the tray which is automatically selected when ATS functions at "04 AutoPaper Type"Load the following paper into the paper trays.- The same size in the same orientation.- The same paper type.To store copy paperObserve the following precautions when storing the paper.- Store paper in a cool, dry area. Using damp paper may cause a paper misfeed.- Keep partially used packages tightly wrapped during storage.- Do not place paper packages vertically to store. Paper curl due to the vertical storage may cause apaper misfeed.
