168 Océ TDS400 Digital Multifunctional System User ManualNote: Make sure that the cover is closed correctly, to make sure correctoriginal move.6 Press the ‘cancel’ button.How to clear a paper jamIf a jam occurs a message appears on the operator panel. If a paper jam occurs,check if: The roll is loaded correct and the media is fed as indicated. The correct media is used (see ‘List of available material types and sizes’ onpage 180). No scraps of material are blocking the paper path Clear a jam in the material feed section1 Turn off the printer.2 Open the correct roll compartment.Note: One compartment can be open at a time.3 Lower the feed table, use the two catches on the front underneath the feed table(see figure 74).[74] Lower the feed table4 Remove the jammed material.5 Close the feed table.6 Close the roll compartment.7 Turn on the printer.Note: If you can not clear the paper jam by opening the feed table than openthe fusing section (see ‘How to solve a jam in the fuser section’ on page 169).
