60 Océ TDS400 Digital Multifunctional System User Manual Select standard cut1 Press the ‘extra’ button.2 Select ‘Paper copy’ with the or button.3 Press button, to enter the ‘Paper copy’ menu.4 Select ‘cut length’ with the or button.5 Press button, to enter the ‘cut length’ menu.6 Select a standard paper format with the or button.7 Press the ‘confirm’ button.Adjust the leading or the trailing stripTo increase the copy length to accommodate for a filing strip select a positiveleading or trailing strip.If you do not want the filing strip to show on the copy, select a negative leadingor trailing strip. The adjustment steps are indicated on the operator panel,expressed in millimetres or 0.1 inches. Adjust the leading or the trailing strip1 Press the ‘strip’ button to toggle between ‘leading’ and ‘trailing’ strip.2 Select a positive or negative value in steps of 10 mm with the or button.3 Select a positive or negative value in steps of 1 mm with the or button.The length of the selected strip is shown in the display. If the adjustment differsfrom the default setting, the indication lights.Attention: If you make the strip larger than the strip on the original, you canloose information.See the figures on the next pages to make a difference between rolls andmanual feed, when you adjust the strips.
