56 Océ TDS400 Digital Multifunctional System User Manual5 Press the button to enter the ‘Lines/text’, ‘Blueprint’ or ‘Photo’ menu.6 Select the needed original type.7 Press the confirm button.Deliver originals after scanningYou can choose for delivery of the original at the front (rewind) or the rear sideof the scanner. Use the output at the rear side of the scanner if your originalsare: thick very thin damaged in a carrier sheet.The rewind setting will return to default when, the ‘cancel’ button is pressed, the panel time out has exceeded. Enable the rewind function1 Press the ‘extra’ button.2 Select ‘Scanner’ with the or button.3 Press the button, to enter the ‘Scanner’ menu.4 Select ‘Rewind original’ with the or button.5 Press the button, to enter the ‘Rewind original’ menu.6 Select ‘on’ or ‘off’ with the or button.7 Press the ‘confirm’ button.Enable automatic feed of the originalTo increase the productivity enable Automatic feed, no need to press the ‘start’button, except for the first original. If you disable automatic feed you mustpress the ‘start’ button. To enable automatic feed1 Press the ‘extra’ button.2 Select ‘Scanner’ with the or button.3 Press the button, to enter the ‘Scanner’ menu.4 Select ‘Autofeed orig.’ with the or button.5 Press the button, to enter the ‘Autofeed orig.’ menu.
