68 Océ TDS400 Digital Multifunctional System User ManualSettings to scanPress the ‘Extra’ button on the scanner operator panel to access the settings tomake a scan. The following options are available in the ‘File’ menu:Destination You can store your scan either in the temporary storage on thecontroller or you can store it on a network destination. You can define amaximum of six destinations in the Scan Manager application. You can selectone of these destinations on the scanner operator panel.Check print A Check print is a print from the scanned original. You can turnthe check print on or off.File resolution The Océ TDS400 Scan Logic® option can scan threeresolutions: 200, 300 or 400 dots per inch (DPI). The higher the resolution, thebetter the image quality. Higher resolution also causes larger sizes of files.File format To define the internal order of the scanned files, select betweenTIFF (Tagged Image File Format), CALS-I (Continuous Acquisition and LifeCycle support), or PDF (Portable Document Format).Optimise size Select this option to decrease the size of the file or to get goodquality.Set the scan size In the ‘Original’ menu.DestinationYou can store your scan either in the temporary store on the controller or on anetwork destination. You can define up to six destinations in the Scan Managerapplication. On the scanner operator panel you can choose one of thesedestinations. Select a destination1 Press the ‘extra’ button.2 Select ‘Destination’ with he or button.3 Press the button, to enter the ‘Destination’ menu.4 Select the needed ‘Destination’ with he or button.5 Press the confirm button.
