34 Océ TDS400 Digital Multifunctional System User Manual Set use DHCP server1 Press the ‘on line’ button to put the printer off line.2 Select the ‘System’ item with the or button.3 Press ‘next/select’ to enter the ‘System’ menu.4 Select ‘Network sett.’ with the or button.5 Enter password.6 Press ‘next/select’ to enter the ‘Network sett.’ menu.7 Select ‘adapter 1’ or ‘adapter 2’with the or button8 Press ‘next/select’ to enter the ‘adapter 1’ or ‘adapter 2’ menu9 Select ‘Use DHCP server.’ with the or button.10 Select ‘Yes’or ‘No’ with the or button.11 Press ‘next/select’ to confirm.12 Press ‘on line’ to put the printer on line again. Set the IP address1 Press the ‘on line’ button to put the printer off line.2 Select the ‘System’ item with the or button.3 Press ‘next/select’ to enter the ‘System’ menu.4 Enter password.5 Select ‘Network sett.’ with the or button.6 Press ‘next/select’ to enter the ‘Network sett.’ menu.7 Select ‘adapter 1’ or ‘adapter 2’with the or button8 Press ‘next/select’ to enter the ‘adapter 1’ or ‘adapter 2’ menu9 Select ‘IP address’ with the or buttonThe first three digits flash.10 Enter the first three numbers of the ‘IP address’ with the or button.11 Press ‘next/select’ to confirm, the next digits flash.12 Enter the next three numbers of the ‘IP address’ with the or button.13 Press ‘next/select’ to confirm, the next digits flash.14 Enter the next numbers of the ‘IP address’ with the or button.15 Press ‘next/select’ to confirm, the next digits flash.16 Enter the next numbers of the ‘IP address’ with the or button.17 Press ‘next/select’ to confirm.18 Press ‘on line’ to put the printer on line again. Set the Subnetmask1 Press the ‘on line’ button to put the printer off line.2 Select the ‘System’ item with the or button.3 Press ‘next/select’ to enter the ‘System’ menu.4 Enter password.5 Select ‘Network sett.’ with the or button.6 Press ‘next/select’ to enter the ‘Network sett.’ menu.
