Control Panel Settings 6VarioLink 2221/2821/3621 6-29Verifying the integrity of files saved on the hard disk during startup(mode 430)The integrity of files saved on the hard disk is verified when the machine isturned on.Settings at time of purchaseSpecifying the settingDuring the production of this unit, the settings in the shaded cells wereselected. The numbers on the right side indicate the page numbers withdescriptions for the corresponding function.2 NoteIf bit 5 of mode 430 is set to "1" in the Soft SW Setting screen, it may takesome time until the initial screen appears when the machine is turned onif many files have been saved in the boxes.Bit 7 6 5 4 3 2 1 0Setting 0 0 0 0 0 0 0 0 (HEX: 00)Bit Description Setting Description PageReference7, 6 ---------- 00 * Do not change thesebits when specifying set-tings for this function.----------5 Specify whether or not anoperation is performed atstartup to verify the integrityof files saved on the harddisk.0 Does not verify the integ-rity----------1 Verifies the integrity4, 3, 2, 1, 0 ---------- 00000 *Do not change thesebits when specifying set-tings for this function.----------
