VL6522c/VL5522c/VL4522c 2-952.26 Printing (LPR/Port9100) 22.26 Printing (LPR/Port9100)Configure settings for LPR or Port9100 printing.LPR printing is performed via the network using the LPR protocol. It is mainly used in UNIX-based operatingsystems.Port9100 printing is performed via the network by directly specifying the RAW port (Port9100) of this machineconnected to the TCP/IP network as a destination printer.Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.d ReferenceFor details on how to install the printer driver, refer to the "User's Guide [Print Operations]".2.26.1 TCP/IP SettingsConfigure settings to use this machine in the TCP/IP network environment.For details, refer to page 2-8.2.26.2 LPD SettingIn the administrator mode of Web Connection, select "Network" ö "TCP/IP Setting" ö "TCP/IP Setting".2.26.3 RAW Port NumberIn the administrator mode of Web Connection, select "Network" ö "TCP/IP Setting" ö "TCP/IP Setting".Reference- If you select [OK] after changing multiple port numbers together in Web Connection or on the controlpanel, a port number duplication error may be displayed. When this error is displayed, first change oneport number and select [OK]. Then change another one and select [OK].TCP/IP Settings(1) LPR printing(2) Port9100 printing(1) (2)LPD Setting RAW Port NumberFinishItem Description Prior checkLPD Select "Enable".Item Description Prior checkRAW Port Number Select the check box of the required port, and enter theRAW port number.
