Using IEEE802.1X authentication22-178 VL6522c/VL5522c/VL4522c2.52EAP-Type Select an EAP authentication method.If you select "Depend on Server", the EAP-Type providedby the authentication server will be used for authentica-tion. Configure the supplicant settings as required for thismachine according to the EAP-Type provided by the au-thentication server.Do not set this item to "OFF".EAP authenticationmethodEAP-TTLS Configure settings for EAP-TTLS.anonymous Enter an anonymous name to be used for EAP-TTLS au-thentication (up to 128 characters).This item is available if EAP-Type is set to "EAP-TTLS" or"Depend on Server".Inner Authentica-tion ProtocolSelect an EAP-TTLS inner authentication protocol.This item is available if EAP-Type is set to "EAP-TTLS" or"Depend on Server".Server ID Enter a server ID (up to 64 characters).This setting is required if you very the CN of the server cer-tificate.Do you verify CN ofthe server certifi-cate?Client Certificates Select whether to encrypt authentication information us-ing client certificates of this machine. You can configurethis setting when client certificates are registered in thismachine.If EAP-Type is "EAP-TLS", the client certificates are al-ways required.This setting can be configured even if EAP-Type is set to"EAP-TTLS" or "PEAP".EncryptionStrengthSelect an encryption strength level for encrypted commu-nication with TLS.• Low: Keys of any length are used for communication.• Mid: Keys that are more than 56 bits in length are usedfor communication.• High: Keys that are more than 128 bits in length areused for communication.This item is available if EAP-Type is set to anything otherthan "OFF" or "EAP-MD5".Network Stop Time If an authentication process does not succeed within thespecified time, all network communication will stop. Tospecify the delay between the start of an authenticationprocess and the stop of network communication, selectthis box.Stop Time Specify the delay (sec.) between the start of an authenti-cation process and the stop of network communication.To restart the authentication process after network com-munication has stopped, turn the main power of this ma-chine off and on again.Item Description Prior check
