VL6522c/VL5522c/VL4522c 2-1072.32 Printing (Netware) 2In NetWare 4.x Remote Printer mode (NDS)1 From the client, log in the NetWare file system with administrator authority.2 Start NWAdmin.3 Select an organization or department container for the print service, and select "Print Services QuickSetup" from the Tools menu.4 Fill in "Print Server Name", "Printer Name", "Print Queue Name", and "Print Queue Volume". Then, setthe "Type" of the printer to "Other/Unknown" and save them.5 Load the PSERVER.NLM file on the NetWare Server console.Then, configure the following settings in "NetWare Setting".Item Description Prior checkIPX Setting Select "ON".Ethernet FrameTypeSelect a frame type to be used. Frame typeNetWare PrintModeSelect "PServer".Print Server Name Enter a print server name to be operated as Pserver (up to63 characters, excluding / \ :; , * [ ] < > | + = ? .).The print servername specified inStep 4Print Server Pass-wordEnter a print server password if necessary (up to 63 char-acters).Polling Interval Set a job inquiry interval.Bindery/NDS Set-tingSelect "Bindery/NDS Setting".File Server Name Enter the priority file server name to be used in the Binderyemulation mode (up to 47 characters, excluding /\ :; , * [ ]< > | + = ? .).Item Description Prior checkIPX Setting Select "ON".Ethernet FrameTypeSelect a frame type to be used. Frame typeNetWare PrintModeSelect "Nprinter/Rprinter".Print Server Name Enter a print server name to be operated as the Nprint-er/Rprinter (up to 63 characters, excluding / \ :; , * [ ] < > |+ = ? .).The print servername specified inStep 4Printer Number Enter the Nprinter/Rprinter number.