VL6522c/VL5522c/VL4522c 2-1772.52 Using IEEE802.1X authentication 22.52.3 IEEE802.1X Authentication SettingIn the administrator mode of Web Connection, select "Network" ö "IEEE802.1x Authentication Setting" ö"IEEE802.1x Authentication Setting".Item Description Prior checkAuthentication Sta-tusThe authentication status is shown as follows.• Authenticated: The authentication has completed.• Authenticating: The authentication is in progress.• Unauthenticated: Not authenticated status• Authentication Failed: The authentication has failed.• Failed to Retrieve Status: No authentication statuscould be obtained.When you press [Refresh], the authentication status is up-dated.IEEE802.1X Au-thentication Set-tingSelect "ON".Supplicant Setting Configure settings required in order for this machine,which is a supplicant (authentication client), to receive au-thentication from the authentication server.Configure settings to fit your environment.User ID Enter a user ID (up to 128 characters).This user ID is used for all EAP-Type options.Password ischanged.Select this check box to change the password.Password Enter the password (up to 128 characters).The password is used for all EAP-Type options other than"EAP-TLS".