VL6522c/VL5522c/VL4522c 10-310.1 Error message list 1010 Appendix10.1 Error message listIf an error message appears, perform the corresponding operation described below.d ReferenceFor details on the network settings, refer to [User's Guide Network Administrator].Message Cause and remedyUnable to connect to the net-work.Make sure that the network cable is correctly connected. In addition,make sure that Network Settings in Administrator Settings have beencorrectly configured.The address for the communi-cation method cannot be select-ed since the number ofaddresses has exceeded themaximum allowed for broad-casting.The number of destinations specified exceeds the number possiblefor a broadcast transmission. Reduce the number of broadcast desti-nations, or send the transmission in multiple batches.Document could not be saved inuser box due to insufficient HDDcapacity. Check log.The hard disk is full. Delete unnecessary data, and then try saving thedata again.The number of registered userboxes has reached the max. al-lowance.The number of User Boxes that can be registered has reached themaximum number possible. Delete unnecessary User Boxes, andthen try registering new boxes again.The number of documentssaved in the User Box hasreached its maximum.The number of documents that can be saved in a User Box hasreached the maximum number possible. Delete unnecessary docu-ments, and then try saving the document again.The number of programmedjobs has reached the max. al-lowance. Wait until a pro-grammed job is completed.The number of jobs that can be programmed has reached the maxi-mum number possible. Wait until a job has been completed, or deletea current job.
