IC-208 12-49Settings on the control panel 1212.4.9 Driver Password Encryption SettingThis function enables setting to use the factory default or to change it to a user-defined encryptionpassphrase for the common encryption key to be added to print jobs. (Default setting: Use Factory Default)- User-Defined: Set an encryption passphrase. Enter an encryption passphrase in 20 characters.- Use Factory Default: Use the factory default encryption passphrase (encryption key (common key) thatis already determined and that is not disclosed).2 NoteUser, account, and secure document passwords are encrypted by the common encryption key.When "User-Defined" is selected for the encryption passphrase, select "Encryption Passphrase" in theprinter driver to enable it, and then enter the same value.If different values are used for the encryption passphrase for the machine and the printer driver, themachine cannot decrypt the encrypted user password, account password or secure documentpassword. Then printing cannot be performed. For details, refer to "Specifying a user-definedencryption passphrase" on page 11-30.When SSL is enabled in OpenAPI and the printer driver can obtain the device information automatically,it is also possible to obtain the common encryption key from this machine automatically.!DetailFor details on displaying the Administrator Settings screen, refer to "Displaying the AdministratorSettings screen" on page 12-39.1 In the Administrator Settings screen, touch [Security Settings].2 In the Security Settings screen, touch [0 Driver Password Encryption Setting].3 Touch the button for the desired setting.!DetailFor the procedure for specifying "User-Defined" for the encryption passphrase, refer to "Specifying auser-defined encryption passphrase" on page 11-30.
