IC-208 4-11Manual installation using the Add Printer wizard 4Printer driver installation by searching printers using the "Add Printer"2 NoteWhen installing on Windows Vista, administrator permissions are required.Printers will be found during installation. Connect this machine to the network, and then turn on thepower.1 Insert the Driver DVD into the DVD drive of the computer.2 Click the [Start] button, and then click "Control Panel".3 From "Hardware and Sound", click "Printer".– If Control Panel is displayed with Classic View, double-click "Printers".The Printers window appears.4 Click "Add a printer" from the toolbar.The "Add Printer" window appears.5 Click "Add a network, wireless or Bluetooth printer".– If the printer is not detected, turn off this machine, then on again.– When turning off the power, then on again, wait at least 10 seconds before turning it on again.Otherwise, this machine may not function properly.The connected printers are detected.6 Select this machine from the list, and then click the [Next] button.– When using the LPR/Port9100 protocol, select the printer having its IP address.– When using an SMB connection, select the printer having its "\\NetBIOS name\print service name".– It may take some time to finish searching the entire list of printers.7 Click the [Have Disk] button.8 Click the [Browse] button.9 Specify the desired folder on the DVD that contains the printer driver, and then click the [Open] button.– Select the specified folder according to the printer driver to be used, the operating system, and thelanguage. Printer drivers that can be selected: Windows Vista: PCL driver, PS driver, fax driver– For details on fax drivers, refer to the User manual – Fax Driver Operations.10 Click the [OK] button.The "Printer" list appears.11 Click the [Next] button.12 Follow the on-screen instructions.– If the "User Account Control" window appears, click the [Continue] button.– If the Verify the publisher dialog box of Windows Security appears, click "Install this driver softwareanyway".13 Click the [Finish] button.14 When the installation is completed, make sure that the icon of the installed printer appears in thePrinters window.15 Remove the DVD from the DVD drive.This completes the printer driver installation.
