4 Manual installation using the Add Printer wizard4-10 IC-2084.2 Windows Vista4.2.1 Network connection (LPR, Port9100, or SMB)In Windows Vista, the printer driver can be installed either by searching printers on the network, or by creatinga new printer port.Specifying the TCP/IP setting for this machineSpecify the IP address of this machine.!DetailFor details on specifying the IP address of this machine, refer to the User manual [NetworkAdministrator].2 NoteWhen using the IPv6 protocol, the Direct Hosting Setting on the machine must be enabled. For details,refer to the User manual [Network Administrator].RAW port number setting for this machineTo use Port9100 printing, enable the RAW port number (9100 at default), in the TCP/IP Setting screen of thismachine.!DetailFor details on specifying the RAW port number of this machine, refer to the User manual [NetworkAdministrator].LPD setting for this machineTo use LPR printing, enable LPD print in the LPD Setting screen of this machine.!DetailFor details on the LPD settings of this machine, refer to the User manual [Network Administrator].SMB setting for this machineIn "Print Setting" in the SMB Setting screen of this machine, specify the NetBIOS name, print service name,and workgroup.!DetailFor details on the SMB settings of this machine, refer to the User manual [Network Administrator].
