IC-208 4-5Manual installation using the Add Printer wizard 44.1.2 Network connection (SMB)When using the SMB printing, specify the port by specifying the printer during the printer driver installationprocess. Printers can be specified either by searching printers on the network, or by entering the printername.TCP/IP setting for this machineSpecify the IP address in the TCP/IP Setting screen of this machine.!DetailFor details on specifying the IP address of this machine, refer to the User manual [NetworkAdministrator].2 NoteWhen using the IPv6 protocol, the Direct Hosting Setting on the machine must be enabled. For details,refer to the User manual [Network Administrator].SMB setting for this machineIn "Print Setting" in the SMB Setting screen of this machine, specify the NetBIOS name, print service name,and workgroup.!DetailFor details on the SMB settings of this machine, refer to the User manual [Network Administrator].Printer driver installation by specifying printers using the "Add Printer Wizard"2 ReminderWhen installing on Windows XP or Server 2003, administrator permissions are required.1 Insert the Driver DVD into the DVD drive of the computer.2 Click the [Start] button, and then click "Printers and Faxes".– If "Printers and Faxes" does not appear in the Start menu, open Control Panel from the Start menu,select "Printers and Other Hardware", and then click "Printers and Faxes".3 For Windows XP, click "Add a printer" on the "Printer Tasks" menu.For Windows Server 2003, double-click the "Add Printer" icon.The "Add Printer Wizard" starts.4 Click the [Next] button.5 Select "Local printer attached to this computer", and then click the [Next] button.– Clear the "Automatically detect and install my Plug and Play printer" check box.The Select a Printer Port dialog box appears.6 Click "Create a new port", and select "Local Port" for "Type of port:"7 In the "Enter a port name" box, enter "\\NetBIOS name\print service name".– Enter the same NetBIOS name and print service name those appear in "Print Setting" in the SMBSetting screen of this machine.8 Click the [OK] button.The Add Printer Wizard appears.9 Click the [Have Disk] button.
