IC-208 4-21Manual installation using the Add Printer wizard 44.3.2 Network connection (SMB)When using the SMB printing, specify the port by specifying the printer during the printer driver installationprocess.TCP/IP setting for this machineSpecify the IP address in the TCP/IP Setting screen of this machine.!DetailFor details on specifying the IP address of this machine, refer to the User manual [NetworkAdministrator].2 NoteWhen using the IPv6 protocol, the Direct Hosting Setting on the machine must be enabled. For details,refer to the User manual [Network Administrator].SMB setting for this machineIn "Print Setting" in the SMB Setting screen of this machine, specify the NetBIOS name, print service name,and workgroup.!DetailFor details on the SMB settings of this machine, refer to the User manual [Network Administrator].Printer driver installation using the "Add Printer Wizard"2 ReminderWhen installing on Windows 2000, administrator permissions are required.1 Insert the Driver DVD into the DVD drive of the computer.2 Click the [Start] button, point to "Settings", and then click "Printers".3 Double-click "Add Printer".The "Add Printer Wizard" starts4 Follow the on-screen instructions.5 In the dialog box for specifying the connection method, select "Local printer", and then click the [Next]button.– Clear the "Automatically detect and install my Plug and Play printer" check box.The Select a Printer Port dialog box appears.6 Click "Create a new port", and select "Local Port" for "Type of port:"7 Click the [Next] button.8 In the "Port Name" box, enter "\\NetBIOS name\print service name".– Enter the same NetBIOS name and print service name those appear in "Print Setting" in the SMBSetting screen of this machine.9 Click the [OK] button.The Add Printer Wizard appears.10 Click the [Have Disk] button.11 Click the [Browse] button.
