The use of the default workflow profilesThe following table makes recommendations about when to use which default workflowprofile.When to use which workflow#When to useProfileYou need a productive workflow but you still want to havesufficient control over the jobs.'Standard'You want to start the jobs one by one. Each time a job has beenprinted, the machine goes on hold. Always touch 'Resume' inthe dashboard to start the next job.'Job by job'You want to check the quality and layout of each first set of ajob before the remaining sets will be printed.'Check and print'The jobs are sent to the machine in a random order. You canmanually define the most productive order in which the machinewill print the jobs.'Manual planning'You want to continue printing while you are absent, for exampleafter working hours. Then the machine will print the scheduledjobs, provided that all the required media, supplies and outputlocations are available.'Unattended'The default settings of each workflow profileThe following table gives an overview of the default 'Receive' and 'Print' settings of eachworkflow profile.The 'Receive' and 'Print' settings#'Print' settings'Receive' settingsWorkflow profile'Check first set''Confirm start ofjob''Destination ofprint job''As in job''Off''Scheduled jobs''Standard''As in job''On''As in job''Job by job''On''Off''Scheduled jobs''Check and print''As in job''Off''Waiting jobs''Manual planning''Off''Off''As in job''Unattended'The following table gives an overview of the default 'Output' settings of each workflowprofile.Chapter 5 - Working with the operator panel122Work with the workflow profiles
