The paper modulesIntroductionThe paper trays contain the media that are required for the print jobs. The default con-figuration of the machine contains 1 paper module with 4 paper trays. You can add 1 or2 more paper modules to the machine. Then the total number of paper trays is extendedto 8 or 12 respectively. You can find more information about the capacities of the papertrays and the supported media size in the appendix of this manual.This section describes the control panel on each paper module.Note:You can use the control panel on the paper modules to open the paper trays and loadthe media. However, the recommended way to open the paper trays and assign the mediais via the 'Schedule' view. You can also open the paper trays and/or assign the media viathe 'Trays' view (see‘Assign the media to a paper tray’ on page 99).Illustration123412341 3254[14] The control panel on the paper modulesThe control panelEach paper module contains a control panel next to the upper paper tray. The controlpanel consists of 4 sections that correspond with the 4 paper trays. Each section displaysthe current filling level of the corresponding paper tray. Furthermore, the control panelindicates whether the media in the paper tray is assigned or not. The following table de-scribes the various parts of the control panel.Chapter 4 - Overview of the system components36The paper modules
