Stop a jobIntroductionWhen the machine is printing a job, you can stop the machine at the following moments.• Stop after a set• Stop after a page• Stop after a job.The following table gives an overview of the stop behavior of the machine. The proceduresin this section describe how to stop the machine via the operator panel.Note:You can also interrupt a job by ejecting a stack of sheets from the stacker. When youpress the eject button next to the stacker door 1 time, the stacker ejects the stack whena set is ready. When you press the eject button 2 times, the stacker ejects the stack assoon as possible.The stop behavior of the machineWhen does the machine stop#ThenWhenThe machine stops when a set of the ac-tive print job is ready. It depends onthe set size and the moment you press thekey, when the machine will stop. For ex-ample, when you have a large set of 1,000pages and you press the key after the firstpage, the printing will continue for acouple of minutes.You press the Hold key 1 timeThe machine stops as soon as possible(after a page, in most cases within 30seconds).You press the Hold key 2 timesThe machine stops when the selected jobis ready.The 'Jobs' view displays a horizontal redand white stop bar below the selected job.The 'Schedule' view displays a verticalstop bar behind the selected job.You touch the 'Stop after job' button inthe toolbar of the 'Jobs' viewChapter 5 - Working with the operator panel52Stop a job
