Select more than one job for printingIntroductionThe table below describes the possibilities to select more than one job for printing.Select more jobs#DescriptionOptionsTouch the jobs you want to print one by one.Select 2 or more jobsmanuallyAll jobs in the list of 'Waiting jobs' are printed. The orderin the list of 'Waiting jobs' determines the print order.However, in the list of 'Scheduled jobs' you can give prior-ity to a job.'Select' button - 'All'All jobs for which the required media are currently availablein the paper trays, will be printed. This improves the pro-ductivity, because you must not change the required mediaduring printing. You may only need to add more of thecurrently available media types.'Select' button - 'Jobswith available media'A label is a name or tag that helps you to identify certainjobs on the operator panel. When a job is sent to theprinter, the person who submits the job can add a label tothat job. The label can be any name that helps to identifycertain jobs. A label is not connected to job settings. Thelabel can be defined in the printer driver, in a job ticket orvia an automated workflow. For example, the label ‘Cus-tomer XYZ’ can be added to jobs. Then you can select andprint all the jobs for 'Customer XYZ' at once.'Select' button - 'Jobswith label'Note:Automated workflows can be defined through the Settings Editor. You can find moreinformation in the online help of the Settings Editor.How to select more than one job for printing1. Touch 'Jobs' -> 'Queues'.2. If collapsed, first touch to expand the list of 'Waiting jobs'.3. Touch the jobs you want to print one by one, or make a selection using the 'Select' button.The selected jobs are highlighted.4. Press 'Print'.Chapter 5 - Working with the operator panel74Select more than one job for printing
