The power modesIntroductionThis section describes the power switches and the main power modes of the machine.The table in this section describes, among other things, the low-power mode and thesleep mode. These modes are energy-saving modes. You can set the timers for these modesin the Settings Editor on the controller. Furthermore, you can set a calendar timer in theSettings Editor. Then the machine will wake up from the sleep mode at the indicatedtime. You can use the calendar timer for example to make sure that the machine is readyfor use at the beginning of your working day. The machine can warm up before you startyour working day. Please refer to the online help on the Settings Editor for more infor-mation about these timers.Description of the power switch and the On/Off buttonThe machine has the following switch and button to control the power supply.• Power switchThe power switch is located at the back side of the machine. The power switch connectsand disconnects the machine to the mains power.• On/Off button with amber and green LEDs .The On/Off button on the machine ‘Introduction to the main system components’ onpage 26 allows you to toggle between the stand-by mode and the sleep mode. This isonly possible if the power switch is in the '1' position and the start-up phase iscompleted.Description of the main power modesThe main power modes#Status of theHold buttonand ReleasebuttonStatus of theOn/Off buttonDescriptionPower modeOffOffThe machine is completely off.The power switch is in the 'O'position. There is no powerconsumption. The machinecannot receive or print jobs.OffChapter 3 - Power information20The power modes
