3 Specifying settings from the control panel3-106 cm3521Specifying settings from the control panel Chapter 33.25 Total counter report settingYou can specify the total counter notification schedule and notification des-tination.The settings that can be specified in the total counter screen are describedbelow.To specify the total counter report settings1 In the Administrator Setting screen, touch [5 Network Setting].2 In the Network Setting screen, touch [9 Detail Setting].3 In the Detail Setting screen, touch [4 Total Counter Report Setting].The Total Counter Report Setting screen appears.4 Specify the desired settings.5 Touch [Close].Item DescriptionSet Schedule Specify the period for notifying the total counter. Two typesof notification schedules can be specified. For details onspecifying the setting, refer to “Schedule setting” onpage 3-107.Set notification addresses. Specify the e-mail address of the notification destination.The schedule can also be specified per address. For detailson specifying the setting, refer to “Notification address set-ting” on page 3-109.Device Nickname Specify the model name that is included in the notificatione-mail. Use the keyboard that appears in the touch panel totype in the model name (up to 20 characters).[Send Now] button Touch to send the current total counter to the notificationdestination.
