Specifying settings using Web Connection 4cm3521 4-95Specifying settings using Web Connection Chapter 44.29 E-Mail SettingE-Mail RX (POP)You can specify the settings to perform the authentication of the e-mailsender with POP Before SMTP.Item DescriptionE-Mail RX Setting Specify whether to use the e-mail reception setting.POP Server Address Enter the receiving POP server address (syntax: “***.***.***.***”or FQDN where the input range of *** is 0 to 255). Whenentering the host name, select the “Please check to enter hostname.” check box.Login Name Enter the user name used to log on to the POP server (up to63 characters).Password Enter the password for logging on to the POP server (up to 15alphanumeric characters).APOP Authentication Enables/disables APOP authentication.Connection Timeout Specify the connection timeout of the server (input range: 30to 300 seconds).Port No. Enter the server port number (input range: 1 to 65535).Use SSL/TLSPort No. (SSL/TLS)Select to use SSL/TLS. Also, enter the port number to beused.Auto Receive Check Select whether to enable Auto Receive Check for e-mails re-ceived.Polling Interval If “Enable” was selected in Auto Receive Check, specify thepolling interval time (input range: 1 to 60 minutes).
