Specifying settings from the control panel 3cm3521 3-107Specifying settings from the control panel Chapter 32 NoteTo display the Administrator Setting screen, refer to “To display the Ad-ministrator Setting screen” on page 3-8.2 NoteTo quit specifying the Utility mode setting, touch [Exit] in the sub displayarea or press the [Utility/Counter] key. Otherwise, cancel the Utility modeby touching [Close] in each screen until the screen for the Copy, Fax,Scan or Box mode appears.Schedule settingYou can specify the schedule for sending the total counter. An example forspecifying “Schedule1” is described below.The settings that can be specified are described below.When “Daily” is specified as the notification periodItem DescriptionInterval of Day(s) Enter the days each month for sending the schedule. Tochange the value, press the [C] (clear) key, and then use thekeypad to type in the value (between 1 and 31).
