Oce cm4010 System Settings Manual

Also see for cm2510: User guide Troubleshooting guide Safety guide Facsimile guide Programming Date & Time

Contents

Oce cm4010 System Settings Manual Manual pdf 105 page image

104Image Send SettingsScan, Internet fax, and fax settings are described below.Operation SettingsScan, Internet fax, and fax settings are described below.Touch the [Image Send Settings] key, touch the [Operation Settings] key, and configure the settings.Default Display SettingFive screen selections are available for the base screenthat appears when you press the [IMAGE SEND] key, orwhen you press the [CLEAR ALL] key ( ) in imagesend mode.• Scan• Internet Fax• Fax• Address Book (ABC)• Address Book (User)When [Switch Automatically to Copy Mode Screen] isselected , the display will automatically switch to thecopy mode screen if no action is taken in the image sendmode screen for 20 seconds.When the [Hold settings for a while after scanning hasbeen completed] checkbox is selected , the settingswill remain in effect a fixed period of time after scanningis completed.Initial Resolution SettingThe following settings are available for the defaultresolutions of scan, Internet fax, and fax mode.• Scan: 100X100dpi200X200dpi300X300dpi400X400dpi600X600dpi• Internet Fax: 200X100dpi200X200dpi200X400dpi400X400dpi600X600dpi• Fax: StandardFineSuper FineUltra FineWhen using a stored image file, select the [Apply theResolution Set when Stored] checkbox and touch the[OK] key to use the resolution set when the file was stored.Default Exposure SettingsThis setting is used to set the default exposure level forscanning originals in image send mode.• ExposureThe exposure can be adjusted automatically ormanually. Select either the [Auto] key or the [Manual]key. If the [Manual] key is selected, specify theexposure with the keys and touch the [OK]key. Lower the level toward "1" for lighter exposure orraise the level toward "5" for darker exposure.• Original Image Type (Configuring the setting isonly possible in scanner mode.)The exposure mode can be selected to match theoriginal type. Select the desired key and touch the[OK] key.Text/Prtd. PhotoText/PhotoTextPhoto*Printed Photo*Map** Does not appear when the exposure is set to [Auto].• Moiré Reduction (Configuring the setting is onlypossible in scanner mode.)To reduce the moire effect when scanning, select the[Moiré Reduction] checkbox and touch the [OK]key.Settings for fax are explained in "11. SYSTEM SETTINGS FOR FAX" in the Facsimile Guide.Half ToneHalf ToneSystem SettingsDefault Exposure SettingsAuto Text/Prtd.PhotoTextPrintedPhotoText/PhotoManualOKPhotoMap1 3 5. .MoiréReduction