28Paper Type RegistrationConfigure a "User type" when the name of the paper type does not appear in the selections or when you wish to selectthe tray properties yourself. Up to 7 user types can be stored.1Press the [SYSTEM SETTINGS] key.2Touch the [Paper Tray Settings] key.3Touch the [Paper Type Registration] key.4Touch the paper type that you wish toedit.The user types have been stored by factory default with the names "User Type 1" to "User Type 7".5Configure the paper type properties.(1) To change the type name, touch the [TypeName] key and change the name.Clear the pre-entered name, and then enter the desiredname (maximum of 14 characters).(2) Touch the checkboxes as desired so thatthey are or .(3) Touch the [Exit] key.• To enable a property, select the checkbox .• The settings that can be selected vary depending on the peripheral devices installed.SYSTEMSETTINGSSystem Settings Admin PasswordDefault SettingsTotal CountAddress ControlExitList Print(User)Fax DataReceive/ForwardUSB-Device CheckPaper TraySettingsPrinter ConditionSettings Document FilingControlSystem SettingsPaper Tray Settings OKTray SettingsPaper Type RegistrationAuto Tray SwitchingSystem SettingsPaper Type RegistrationSelect the paper type to edit.CancelUser Type 1User Type 5User Type 2 User Type 3User Type 7User Type 4User Type 6Paper Type RegistrationNo.01Type Name User Type 1ExitCancelFixed Paper SideDisable StapleDisable DuplexDisable Punch(3)(1)(2)
