Oce cm4010 System Settings Manual

Also see for cm2510: User guide Troubleshooting guide Safety guide Facsimile guide Programming Date & Time

Contents

Oce cm4010 System Settings Manual Manual pdf 110 page image

109I-Fax SettingsI-Fax Default SettingsThese settings are used to configure the default settings for Internet fax.Touch the [Image Send Settings] key, the [I-Fax Settings] key, and the [I-Fax Default Settings] key, and configure thesettings.I-Fax Own Name and Address SetThis is used to configure the sender name and addressfor Internet fax. The entered sender name and addressare printed at the top of each fax page you send.1 Touch the [Name] key and enter thename.A maximum of 40 characters can be entered for the name.After you have entered the name, touch the [OK] key.2 Touch the [Own Address] key and enterthe sender address.A maximum of 56 characters can be entered. After youhave entered the address/domain, touch the [OK] key.3 Touch the [OK] key.Auto Wake Up PrintWhen the [POWER] key ( ) is "off" (but the mainpower switch is "on") and an Internet fax is received, thisfunction activates the machine and prints the fax.To enable this setting, select the checkbox andtouch the [OK] key.When this function is disabled, received Internet faxesare not printed until the [POWER] key ( ) is switched"on".I-Fax Speaker Volume SettingsThis is used to adjust the volume of fax receive signalsand communication error signals heard through thespeaker.A fax receive signal sounds after the machine checksthe mail server and retrieves received faxes. Acommunication error signal sounds when a deliveryfailed e-mail is received from the destination Internet faxmachine.Select one of the keys and touch the [OK] key.Original Print on TransactionReportWhen a transaction report is printed, this is used to printpart of the first page of the transmitted original on thetransaction report. Select one of the settings below.• Print Out All Report• Print Out Error Report Only• No Printed ReportSelect one of the keys and touch the [OK] key.This setting will not be effective if the following"Transaction Report Print Select Setting" (page 110) isset to "No Printed Report".These settings can be configured when the Internet fax expansion kit is installed.For the procedure for entering text, see "6.ENTERING TEXT" in the User's Guide.System SettingsI-Fax Own Name and Address SetName AAA AAAaaa@aaa.aa.comOwn AddressOKSystem SettingsI-Fax Speaker Volume Settings OKReceive SignalCommunicationError SignalVolume:SmallVolume:MiddleVolume:BigNo Sound