5This chapter describes the system settings that can be configured by general users of the machine.Accessing the System Settings (General)When User Authentication is not EnabledMake sure that the machine is in the standby state and then press the [SYSTEM SETTINGS] key on the operationpanel.Operation panelWhen the [SYSTEM SETTINGS] key is pressed, the following menu screen appears on the touch panel. Touch the itemin this screen that you wish to configure. For detailed explanations of each of the settings, see the following pages of thischapter.System settings screen (factory default state)1 SYSTEM SETTINGS (GENERAL)• To quit the system settings, touch the [Exit] key in the top right corner of the screen.• User authentication is initially disabled (factory default setting).DOCUMENTFILINGIMAGE SENDCOPYJOB STATUS SYSTEMSETTINGSLOGOUTLINEDATAPRINTREADYDATA[SYSTEM SETTINGS] keySystem Settings ExitAdmin PasswordList Print(User)Fax DataReceive/ForwardUSB-Device CheckDefault SettingsTotal CountPaper TraySettingsPrinter ConditionSettingsAddress ControlDocument FilingControl[Exit] keySetup Items
