4-20SPECIAL PAPERSThe tray 2 and the bypass tray on the optional duplex module with bypass tray can be used to make copies ontransparencies, postcards, label sheets, envelopes* 1, and plain paper.*1 Envelopes can be placed in the tray 2.1 Place the original in the document feedertray or on the document glass. (pages 4-3to 4-6)2 Load the special paper in the bypass tray.Place the paper with theprinted side face down.See page 2-3 for thespecifications of paperthat can be used in thebypass tray.For the paper loadinginstructions, see"Loading paper in thebypass tray" (page 3-3).3 Touch the [PAPER SELECT] key.4 Set the type and size of paper loaded in thebypass tray.(1)The (X) key showsthe currently selectedpaper type.(2)The (Y) key showsthe size of paperloaded in the bypasstray.(3)To change the displayed paper type, touch the(X) key before touching the (Y) key. Whenloading paper, if you changed the paper sizefrom an inch size to an AB size (or from an ABsize to an inch size), or if you changed the papertype, be sure to change the paper type and sizesettings as explained in steps 5 to 6 on page 2-5, and steps 7 to 10 on page 2-6.5 Select the bypass tray.6 Select any desired copy settings such asthe exposure or number of copies, andthen press the [START] key.When copying from thedocument glass in thesort mode using the[START] key, touch the[READ-END] key afterall originals have beenscanned (step 7 on page4-12).AUTOAUTO100%8 x11PAPER SELECTCOPYEXPOSURE41/2(X) (Y)READY TO SCAN FOR COPYPLAIN8 x111/28 x111/28 x111/211x1711x17PPPPREADY TO SCAN FOR COPYPLAIN8 x111/28 x111/28 x111/211x1711x17PPPP
