SPECIAL MODES5-35Margin shiftThe margin shift function will automatically shift the text or image on the copy paper approximately 1/2" (10 mm) inits initial setting.This function is convenient when stapling or binding copies with a string.1 Touch the [MARGIN SHIFT] key on thespecial modes screen.The margin shift settingscreen will appear.The margin shift icon( ) will also appear inthe upper left of thescreen to indicate thatthe function is turned on.2 Select the shift direction.Touch a shift directionkey to select right or left.The selected key will behighlighted.3 Set the shift amount as needed and touchthe [OK] key.Use the and thekeys to set the shiftamount. The shiftamount can be set from0" to 1" in 1/8" (0 to 20mm in 1 mm)increments.4 Touch the [OK] key on the special modesscreen.You will return to the main screen of copy mode.NOTES● The initial setting for the margin width can be changed in the administrator settings to any value from 0 to 1" (0to 20 mm). (Page 17 of the administrator settings guide)● When margin shift is selected, rotating copying will not operate even if the condition for rotate copying is met.Image shiftedto the right Image shiftedto the leftMarginMarginOriginalTwo-sided copyingImage shiftedto the rightMarginImage shiftedto the leftMarginOrOne-sided copyingOriginal●The shift direction can be selected from right or leftshift as shown in the illustration.To display the special modes screen...See "General procedure for using specialfunctions" on page 5-2.SPECIAL MODESMARGIN SHIFTPAMPHLET COPYERASEJOBBUILDRIGHT LEFTAbout the steps that followIf an automatic document feeder is being used,see pages 4-7 through 4-10. If the documentglass is being used, see pages 4-11 through 4-13.To cancel the margin shift function, touch the[CANCEL] key on the margin shift setting screen(step 3).SIDE 1(0 1)inch(0 1)inchSIDE 2OKCANCELOK1/2 1/2
