LOADING PAPER2-72Programming and editing paper typesTo program or edit the name of a paper type or set paper attributes, follow the steps below.1 Follow steps 1 and 2 of "Setting the papertype and paper size" (page 2-5)2 Touch the [PAPER TYPE REGISTRATION]key.3 Select the paper type that you wish toprogram or edit.4 Touch the [TYPE NAME] key.A character entry screenappears.Enter a type name(maximum of 14characters). (See page7-29 to enter characters.)5 Set the attributes of the paper tray.Touch the checkboxes tothe left of the items toselect them.6 Touch the [EXIT] key to exit theprogramming/editing procedure.OKPAPER TYPE REGISTRATIONSYSTEM SETTINGSTRAY 2 TYPE/SIZE SETTINGUSER TYPE 1SELECT THE PAPER TYPEUSER TYPE 5USER TYPE 2USER TYPE 6USERUSERFIXED PAPER SIDETYPE NAMEPAPER TYPE REGISTRATIONNo.01USER TYPE 1DISABLE STAPLEDISABDISABFIXED PAPER SIDETYPE NAMEPAPER TYPE REGISTRATIONNo.01USER TYPE 1DISABLE STAPLEDISABDISAB"FIXED PAPER SIDE" : Select when paper is to beloaded print side down in thetray. Make sure a checkmarkdoes not appear when paper isto be loaded print side up.• If the two-sided function isprohibited in "DISABLING OFDUPLEX" in the administratorsettings (page 11 of theadministrator settings guide), donot use this setting."DISABLE DUPLEX" : Prohibits two-sided printing.Enable when the back side ofthe paper cannot be printedon."DISABLE STAPLE" : Prohibits stapling. Enablewhen using special paperssuch as transparency film andlabel sheets."DISABLE PUNCH" : Prohibits punching. Enablewhen using special paperssuch as transparency film andlabel sheets.NOTE"FIXED PAPER SIDE" and "DISABLE DUPLEX"cannot be simultaneously enabled.DISABLE DUPLEXDISABLE PUNCHEXITCANCEL
