Oce im4512 Operation Manual

Also see for im3512: Programming Date & Time Facsimile operation manual Settings guide Operation manual Operation manual

Contents

Oce im4512 Operation Manual Manual pdf 38 page image

LOADING PAPER2-67 Select the size of paper that was loaded inthe tray.Touch the appropriate keys (checkboxes).8 Touch the [OK] key in the size settingscreen.You will return to the tray setting screen of step 4.9 Select output functions that can be usedwith the selected tray.Touch the checkboxesunder the desired itemsto select them.Checkboxes that can beselected will varydepending on the optionsthat are installed.10 Configure paper settings for each tray andthen touch the [OK] key to exit.Setting the paper size when a special size is loadedTray 2 and the bypass tray1 Perform steps 1 through 6 of "Setting thepaper type and paper size" (see page 2-5).2 Touch the [SIZE INPUT] key and thentouch the [INCH] tab.The size entry paletteappears.3 Touch the key or the key to enterthe X (width) and Y (length) dimensions ofthe paper.Entry of the X dimension(width) is initiallyselected. Touch the [Y]key and enter the Ydimension (length) in thesame way as the Xdimension.4 Touch the [OK] key.You will return to the sizesetting screen of step 2.5 If the paper is a non-standard size, selectthe [NON STANDARD SIZE] checkbox.6 Perform steps 8 through 10 of "Setting thepaper type and paper size" (See above).[AUTO-INCH] key : Select when you have loadedan inch-based size of paper.[AUTO-AB] key : Select when you haveloaded an AB size of paper.[SIZE INPUT] key : Select to directly enter apaper size (see below).[NON STANDARDSIZE] checkbox: Select when you haveloaded a non-standard sizeof paper (see below).[POST] key : Select this when you haveloaded postcards.NOTESizes that can be selected vary depending on theselected paper type.11X17,8 X14,8 X118 X11R,7 X10 ,5 X8 R1/2 1/21/2 1/21/4 1/2 1/2A3,A4,A4R,A5R,B4,B5B5R,216X330(8 X13)1/2TYPE OKPLAINTRAY 2 TYPE/SIZE SETTINGSYSTEM SETTINGSTYPEAUTO-INCHSIZE INPUTAUTO-ABSIZEX17 Y11 NON STANDARDSIZE 2/2NOTEThe type and size of paper loaded in the bypass traycan also be set from the paper selection screen.Touch the [PAPER SELECT] key at the top of thebase screen to display the paper selection screen,touch the [PAPER SELECT] key for the bypass tray,and then go to step 6.PRINT COPY FAX I-FAX DOC.FILINGNOTESpecial sizes of paper cannot be loaded in trays 1, 3 and 4.ABY 1117X (5 1/2 17)inchINCHOK(5 1/2 11 5/8)inchYXABY 1117YXINCHOK(5 1/2 17)inch(5 1/2 11 5/8)inchXABY 1117YXINCHOK(5 1/2 17)inch(5 1/2 11 5/8)inchNON STANDARDSIZE11X17,8 X14,8 X111/2 1/28 X11R,7 X10 ,5 X8 R1/21/4 1/2 1/21/2A3,A4,A4R,A5R,B4,B5B5R,216x330(8 x13)X17 Y115/81/2