2 Installing Client Software for Windows122 Repairing Client SoftwareRepairing Client SoftwareWhen the client software will not work correctly, you can repair the client software.Repairing Client Utilities SoftwareThe following describes an installation on Windows XP. The procedure is the same when otherversions of Windows are used.y Do not perform preparing the client software on Windows XP that the Service Pack 2 is notinstalled. In that case, uninstall the client software and then install again to repair the clientsoftware.y Before repairing the software, please make sure you exit Document Monitor.1 Insert the Client Utilities CD-ROM into the CD-ROM drive.y If the installer does not automatically start, double-click “Setup.exe” in the Client Utili-ties CD-ROM.2 Select “Repair” and click [Next].y Repairing files starts.If the printer drivers and N/W-Fax driver are installed, the Select Port screen is displayed.If this screen is displayed, select “Local Port” and select the port for the printer drivers ifprinter drivers were installed. If this screen is displayed, specify the network path orqueue name and click [Next].
