3 Installing Client Software for Macintosh154 Installing the Printer on Mac OS 8.6/9.xInstalling the Printer on Mac OS 8.6/9.xInstalling the Macintosh PPD FileThe Macintosh PPD file that is provided in the Client Utilities CD-ROM can be installed by copy-ing it to the System Folder: Extensions: Printer Descriptions folder.This PPD file supports printing from Mac OS X 8.6 or 9.x. In addition, it supports printing withthese operating systems running on the Mac OS X 10.1/10.2 Classic Mode. The options needto be configured manually in Mac OS X 10.1.Copying the PPD file to Mac OS 8.6 or 9.x1 Insert the Client Utilities CD-ROM into the CD-ROM drive and openyour language folder in the “Client:MacPPD:OS9” folder.2 Copy the Stufflt file (Oce_e-ST450_452Srs.sit or Oce_e-ST280_282Srs.sit) to the desktop, and extract the Macintosh PPDfile.To extract the file, the Stufflt utility must be installed on your computer. For instructionson how to extract the file, refer to your StuffIt documentation.3 Double-click the boot drive icon and open the “SystemFolder:Extensions:Printer Descriptions” folder.4 Select and drag the Macintosh PPD file that you extracted to the“Printer Descriptions” folder.5 Continue the procedure for configuring the printer.P.154 “Configuring the Printer on Mac OS 8.6/9.x”Configuring the Printer on Mac OS 8.6/9.xAfter you copy the PPD file to the Printer Descriptions folder in the System Folder, you can con-figure the printer.This equipment supports two types of Macintosh Printing Service: LPR Printing or AppleTalkPrinting.y LPR PrintingWhen this equipment and your computer are connected over TCP/IP network, you canenable LPR printing from Macintosh computer.y AppleTalk PrintingWhen this equipment and your computer are connected over AppleTalk network, you canenable AppleTalk printing from Macintosh computer.Configuring Macintosh LPR printingBefore installing the printer driver for LPR printing on Macintosh, check with your system admin-istrator to make sure of the following:- This equipment is connected to the network and turned on.- The TCP/IP setting is correct.- LPD Printing Service is enabled on this equipment.
