2 Installing Client Software for Windows68 Installing Client Software for SMB Printing10 The installation is completed.Before using the printer driver for printing, please configure the installed options of theequipment and department code (if required) on the printer driver.P.192 “Before Using the Printer Driver”Installation for SMB Printing by Point and PrintThe procedure to install the printer driver for SMB printing by Point and Print differs dependingon the version of Windows used.P.68 “Windows NT 4.0/2000/XP/Server 2003”P.70 “Windows 98/Me”It assumes using SMB printing by Point and Print in a small network. If you can use the Win-dows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003 as a print server, it is rec-ommended to set up for printing via Windows print server. For further information about settingup printing via a Windows print server, see the Network Administration Guide.y Document Monitor is also available for SMB printing. To install Document Monitor, you mustinstall it from the Client Utilities CD-ROM separately.y The Font Manager is also available to install and manage the TrueType fonts on your com-puter. To install the Font Manager, you must install it from the Font CD-ROM that comes withthe Printer Kit or Printer/Scanner Kit.P.372 “Installing Font Manager”Windows NT 4.0/2000/XP/Server 2003Installing the printer drivers for SMB printing by Point and PrintThe following describes an installation on Windows XP. The procedure is the same when otherversions of Windows are used.You must log into Windows as a user who has the “Administrators” or “Power Users” privilegewhen using Windows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003.
