Printing from an Application 311Example: The command to specify output bin 1 is “lp -o bin1 filename”.Hole PunchingWhen the hole punch option is installed it can be activated using the following option.If this option is not specified, the default value of “nopunch” will be used.This function is not available for all paper sizes and the users should refer to the copier manualfor a list of compatible paper sizes. In particular, A5, A6 and statement paper sizes will not workwith this function.Example: The command to hole punch the long edge feed portrait page is“lp -o punch=1 filename”.Media TypeThe paper source can also be selected using the media type using the following option.In PostScript Deferred Media Selection is always turned on so the paper size has priority overthe media type and the paper source.In PCL5e the paper size always has priority over the media type and the paper source.If this option is not specified, the default value will be used.Example: The command to specify Thick1 media type is “lp -o mtype=Thick1 filename”.Option Value AlternateValue Descriptionpunch=0 nopunch Hole punching is turned off.punch=1 Hole punch long edge without rotation.punch=2 Hole punch short edge without rotation.punch=3 Hole punch long edge with 180 degree rotation.punch=4 Hole punch short edge with 180 degree rotation.Option Value AlternateValue Descriptionmtype=Plain The paper source that contains Plain paper isrequested.mtype=TransparencyThe paper source that contains transparency slides isrequested.mtype=Thick1 The paper source that contains Thick1 paper isrequested.mtype=Thick2 The paper source that contains Thich2 paper isrequested.mtype=Thick3 The paper source that contains Thich3 paper isrequested.
