32OKIFAX 45006. Press the START key. The display shows:NO= LOCATION>7. Enter the alternate fax number. Refer to the instructionsfollowing Step 3.8. Press the START key to finish programming the One Touchkey. The display shows:LOCATION PROGRAMMINGENTER (SRCH, OT, A/D, #)9. To continue programming One Touch keys, go back to Step2. If you are finished programming, press the SELECTFUNCTION key.10. Lift off the plastic cover above the One Touch label. Usinga pencil, write in the name for your newly programmedOne Touch key. Replace the cover.Note: If you want to delete any programming for a OneTouch key, follow Steps 1 - 2. At Step 3 press the 9/SPACEkey until the number is deleted, then continue with Steps8 - 10.One Touch ParametersIf you are experiencing problems communicating with a remotelocation in a very noisy telephone area, set up a One Touch keyfor that location and try turning Echo Protection on or loweringthe transmission fax speed/rate for that One Touch key.1. Press the SELECT FUNCTION key.2. Press the USER PROG One Touch key. The display shows:1:FUNC. PROGRAMMINGYES (flflflflfl) NO (‡‡‡‡‡/1-7)3. Press the Ù YES key. The display shows:FUNCTION NO [ ]ENTER 01-284. Using the numeric keypad, enter 28. The display shows:28:ONE TOUCH PARAMYES (OT) NO (‡‡‡‡‡)5. Press the One Touch key for the location whose settingsyou want to change. The display shows:ECHO PROTECTION[OFF] YES (flflflflfl) NO (‡‡‡‡‡)6. Press the NO ı key to switch Echo Protection on.7. Press the Ù YES key to confirm your selection. The displayshows:FAX SPEED[14.4K] YES (flflflflfl) NO (‡‡‡‡‡)8. Press the Ù YES key to confirm the fax speed, or press theNO ı key until the desired fax speed is selected.9. Press the Ù YES key to confirm your selection. The displayshows:28:ONE TOUCH PARAMYES (OT) NO (‡‡‡‡‡)
