Oki B 4500 User Manual

Also see for B4500 Series: User guide User guide Install guide Safety information Installation instructions

Contents

Oki B 4500 User Manual Manual pdf 66 page image

66OKIFAX 45006. To select another user function, press the STOP key andreturn to step 4.7. Press the SELECT FUNCTION key to finish.Setting Distinctive RingNote: In some countries, distinctive ring service is notavailable from the local telephone company.1. Press the SELECT FUNCTION key.2. Press the USER PROG One Touch key. The display shows:1:FUNC. PROGRAMMINGYES (flflflflfl) NO (‡‡‡‡‡/1-7)3. Press the Ù YES key. The display shows:FUNCTION NO.[ ]ENTER 01-284. Using the numeric keypad, enter 12. The display shows:12:DISTINCTIVE RING[OFF] YES (flflflflfl) NO (‡‡‡‡‡)5. Press the NO ı key. The display changes to:12:DISTINCTIVE RING[SET] YES (flflflflfl) NO (‡‡‡‡‡)6. Press the Ù YES key. The display changes to:SETUP FAX RINGCALL FAX NUMBER NOW7. Using a separate telephone line, immediately dial the numberassigned to the fax machine (you must do this within 90seconds). When your fax machine begins to ring, the displaychanges to:AUTO DETECTINGRING PATTERNYour fax machine then automatically detects and remembersits assigned ring pattern. When your fax machine hasfinished programming its ring pattern, the display shows:DISTINCTIVE RING SETRESULT=OKAfter detecting and remembering the ring pattern, the displaychanges to:DISTINCTIVE RING[ON] YES (flflflflfl) NO (‡‡‡‡‡)8. Press the Ù YES key to confirm your selection.9. Press the SELECT FUNCTION key to finish.Note: Occasionally, your fax machine may not be able todetect the ring pattern on its first try. If this happens, thedisplay changes to:DISTINCTIVE RING SETRESULT=NGIf this happens, follow the above instructions again.